ChineseEnglish
SERVICE HOTLINE0579-87236560
Contact us
support hotline :
0579-87236560
Address: No. 10, Liboer Avenue, Xialixi Industrial Zone, Shizhu Town, Zhejiang Province
TEL:(86)0579-87236560
(86)0579-87237528
FAX:(86)579-87236670
sales@yakexicn.com
Resin sheet grinding wheel, its working principle is

Its working principle is: put the mixture into the upper hopper, shake it, drop it on the conveyor belt, scrape it with a scraper, then adjust the conveying speed, then send the material to the weighing hopper, after weighing accurately The material is put into the mold cavity.

The design principle seems to be quite effective in increasing production efficiency. But there is a practical problem that no matter how it is adjusted, it will never reach the ideal level of design. Because the thin grinding wheel is not like smelting corundum and silicon carbide, the error of the raw material can't be too large. It is not an easy task to weigh accurately through the conveyor belt. Repeated adjustment can not only improve the efficiency, but also waste a lot of time. Nowadays, a compromise is adopted to bypass the more difficult feed system, artificial feed, multi-station press, labor intensity reduction, and production efficiency.

The ideal feed system needs to be improved and developed. Once this technology is mastered, it will enable the production of thin-plate grinding wheels as fast as the production of coated abrasives, fully mechanized and automated, and bring about tremendous changes in the sheet market.